Products
Paint Roller Finishing Machine
Paint Roller Finishing Machine CS-G8803L ( 6 in 1 )
Paint roller finishing machine is optional with advanced version of EPC access system, which is used to connect with factory industry 4.0 system / ERP system/ChaoSheng's Equipment Network Monitoring System, etc. The pipe cutting length, chamfer angle and carding depth are adjustable.
The 6-in-1 finishing machine adopts the most advanced electrical integration design at present：
The equipment adopts PLC programming control system and touch screen operation interface, so that various product process parameters can be flexibly set on the equipment;
The extensive use of sensors can monitor the actions in operation and whether the materials are in place in real time;
The equipment will automatically alarm and prompt the point of the problem in the event of an action failure during operation, and an abnormal shutdown caused by an abnormality, which is convenient and quick to deal with. Even a novice is effortless to operate;
It integrates six functions :
1)Pre-cut;
2)Cut;
3)Straight carding;
4)Bent carding;
5)Two ends chamfering;
6)floation collection.
Multiple processes are formed at one time, which solves the complicated processes of traditional multiple semi-automatic equipment, saving labor and energy. (Each function can be turned on or off according to the actual production demand.);
360 degree rotatable control box is adopted to facilitate operators to operate and monitor equipment in different positions; One machine with multiple functions: For rollers with diameter Φ 30mm and above can share one equipment by replacing accessories;
The equipment is delivered after passing the factory commissioning. After landing, You can run machine directly after connecting the power supply and air source, adding materials. No need secondary assembly and commissioning;
The equipment is available in Normal stand and HI Stand which is CE certificated by TUV Rhineland;
Main configuration:
Normal Stand: Touch Screen (China Inovance) + PLC (Taiwan Delta)
HI Stand: Touch Screen (Germany Siemens) + PLC (Germany Siemens)
New function for option:
1) Automatic length adjusting system for cutting and beveling. No need manual adjust the length when shaft between different lengths.
2) Automatic cleaning system on two carding/combing/brushing shafts. No need manual regularly to clean flocculent
It can be connected with our end-cap inserting machine to form a full-automatic production line without any extra spare parts.
This surface treatment machine from Foshan Chaosheng Automation is used for polishing, cleaning and finishing of metal and plastic workpieces. It effectively improves surface smoothness, brightness and corrosion resistance. The machine features stable performance and high processing efficiency.
FAQ
